Cap & Pin Replacement Insulator

Cap & Pin Replacement Insulator Upto 230kV

Newell-PSN also supplies station post insulators for replacement of cap and pin insulators. Newell-PSN supplies an extensive line of specially designed insulators as replacements for cap and pin insulators and cap and pin stacks. These cap and pin replacement insulators are of the correct height, bolt circle, electrical characteristics and mounting configuration to permit direct substitution for the cap and pin or cap and pin stack.

The replacement products are designed, manufactured and tested according to the parameters outlined in ANSI Standard C29.9, with allowances made for the dimensional differences necessary in this unique application. All Newell-PSN’s cap and pin replacement insulators are manufactured from high strength alumina porcelain and subjected to the routine and quality conformance tests as specified in ANSI Standard C29.9. We can design and supply insulators to meet any application. The following is a limited list of replacement insulators:

Cat. No. TR Height (in.) BC (in.) Cantilever (lbs.) App kV+ BIL Base Design
8113 7 12 3 2000 15/23 150 Cap Or Pedestal
8114 10 15 3 2000 34.5 200 Cap Or Pedestal
8208 16 29 3 1500 69 350 Cap Or Pedestal
8414 26 58 5 1200 161 750 Cap Or Pedestal
8422 173 43.5 5 2900 115 550 Cap Or Pedestal
8416 174 58 5 2000 115 750 Cap Or Pedestal
8722 175 72.5 5 1450 138 900 Cap Or Pedestal
8716 176 87 5 1100 230 1050 Cap Or Pedestal
^